BACK PULLOUT PUMPS (ANALA BRAND)

We are an ISO 9001-2000 certified pump manufacturing Company details as under.

Application

AWP/AWC series of centrifugal pumps in C.I, SS304, SS316, Alloy-20, Hostelloy-C, etc., are excellent for handling clean or slightly turbid, non-aggressive liquids. They are suitable for pumping condensate, including water upto 100^o C, irrigation, general water supply in agriculture, trade and Industries with favorable NPSH conditions.

Construction Features

Horizontal single stage volute casing pump’s dimensions correspond to DIN 24255 with end suction and top centerline discharge. Back pullout design enables to remove the rotor assembly without disturbing the pipelines. The supports feet are integrally cast with volute casing.

The AWP/ACP range comprises of 31 pump types with 3 shaft sizes, which cover the entire range with maximum interchangeability. For pumps nut and bearings are interchangeable. Impeller is hydraulically balanced by back vanes, and in the case of larger impeller diameter by renewable wear ring and relief holes.

Technical Data

• Capacity Upto – 550 M3/hr
• Total head Upto – 100 Meters
• Speed Upto – 3600 RPM
• Temperature Upto - 160^o C
• Casing Pressure Upto – 16 cm²

Shaft

Flanges Flange dimensions are according to Din 2532/2533. ANSI/BS is an option.
Direction Or Rotation Moves clockwise from the drive end

Casing Pressure

16 Bars (Subject to total head of 100 Metres)

Shaft Sealing

Soft packed stuffing box or mechanical seal.

• For temperature range - 100C to 160^o C self-flushing uncooled stuffing box.
• For temperature range - 100C to 1600C external flushing uncooled stuffing box
• For temperature range upto 1600C cooled stuffing box.
• Mechanical seal, as optional.